1. Save a large amount of copper materials and save labor hours for making copper sleeves for vehicles
2. Compared with car made shaft sleeves and rolling bearings, it is lighter in weight and lower in cost；
3. It can process various cavities, pits, and store a certain amount of grease on the friction surface, extending the refueling time by 5 times compared to copper sleeves；
4. Extremely high load-bearing capacity, especially suitable for rough friction surfaces；
Products available: straight sleeve, thrust washer, flanged sleeve, bearing shell, sliding plate, steel sleeve assembly.

Overall characteristics	Value	Unit
Basic information
Code name	FB-090
Material name	CuSn8P(Qsn8-0.3)
Main application areas	Agricultural machinery, construction machinery, engineering machinery, etc.
Density	8.8	g/cm³
Maximum dynamic load	120	N/mm²
Maximum linear velocity (grease lubrication)	2.5	m/s
Maximum PV value (grease lubrication)	2.8	N/mm²·m/s
Tensile strength	>460	N/mm²
Yield strength	>280	N/mm²
Hardness HB	90~150	HB
Matching axis
Hardness HRC	≥50	HRC
Roughness	0.4~1.0
Applicable temperature	-40~150	℃
Coefficient of friction	0.06~0.15
Thermal conductivity	58	W/(m·K)
Linear expansion coefficient (axial)	18.5×10-6	/K

Standard Dia.	O.D.Size	Housing Bore	I.D.Size	Matching Shaft Diameter
10~18	+0.065 +0.030	+0.018 0	+0.046 0	-0.016 -0.043
18~30	+0.075 +0.035	+0.021 0	+0.052 0	-0.020 -0.020
30~50	+0.085 +0.045	+0.025 0	+0.062 0	-0.025 -0.064
50~80	+0.100 +0.055	+0.030 0	+0.074 0	-0.030 -0.076
80~120	+0.120 +0.070	+0.035 0	+0.087 0	-0.036 -0.090
120~180	+0.170 +0.100	+0.400 0	+0.100 0	-0.043 -0.106
180~250	+0.210 +0.130	+0.046 0	+0.115 0	-0.050 -0.122
250~315	+0.260 +0.170	+0.052 0	+0.130 0	-0.056 -0.137